Geist GBB100 Climate Monitor w Built in POE, temp and humidity / dew-point sensors, capacity of four external sensors Output one NO/NC relay auto-dialer
Like all other Geist environmental monitors, the GBB100 POE allows users to keep an eye on remote conditions from a secure Web interface receiving SNMP, email, text message and voice call* alert notifications when user-adjustable thresholds are exceeded.
The Web interface provides an overview of environmental measurements with real-time sensor data. All measurements are logged allowing users to collect data for trending and capacity management. The GBB100 POE offers flexible access rights and security settings with up to three access account levels. It offers secure access through the Web and supports HTTP and HTTPS protocols. Up to 50 customizable alarms can be configured with alarm escalations per sensor.
The GBB100 POE features four 0–5VDC/dry-contact analog inputs and one digital sensor port. Up to four digital sensors can be connected using a standard splitter. A variety of optional plug-and-play sensors are available for use with the GBB100 POE including but not limited to, temperature, humidity, airflow, water and smoke detection sensors, door position, power failure and more. One of the unique features of the GBB100 POE is its relay contact port used to energize or de-energize an external device.
At just 1U high and approximately 8.5 inches wide, the GBB100 POE is a compact solution perfect for tight installments. The GBB100 POE is shipped with rack-mount brackets offering flexible wire management options.
Easily view and log temperature, relative humidity/dew point and external sensors over the intranet or the Web. No software required–securely access the graphical user interface from a Web browser.
Built-in Power over Ethernet (PoE) converges power and data in between the switch and the GBB100 POE, eliminating the need for electrical wiring. Power adapter is provided for applications without PoE support.
SNMP, Email and SMS Alerts
The GBB100 POE can trigger escalating alarms if temperature or humidity fall outside of specified parameters via SNMP (v1, v2c), email and SMS messages (email to SMS gateway). For example, specify an email notification to one or more users at 70° F, add another layer of personnel to the email alarm at 80° F, add your third party contractor at 85° F, etc. You can specify up to 50 alarms per unit.
Interface Network IP Cameras
The Web page interfaces up to four IP cameras, allowing you a quick view of remote conditions—especially useful in the event of an alarm.
No Software Required
The GBB100 POE is simple to install and use, requiring no special software other than a standard Web browser. The GBB100 POE connects to an Ethernet network with a standard RJ45 connector and sends data in standard TCP/IP packets. It is easily configured with a simple menu using a Web browser and can be password protected with three access account level types: Administrator, Control and View Only. From within an Intranet or over the Internet, users can securely access the monitor by entering its IP address.
* requires an Auto-Dialer
Specifications
On-board Sensors:
Temperature: -13 °F to 176 ° F (-25 °C to 8 °C), +/- 0.5° C
Humidity: 5% to 95%, +/- 2%
Dew Point: -47 °F to 174 °F (-44 °C to 79°C)
Power: PoE or 6VDC (See chart below)
Ethernet: 10/100 Mbps Full Duplex, RJ-45 receptacle
Real-Time Clock (RTC) with power backup
One digital sensor port (connect up to 4 using splitters, 600 Ft maximum aggregate length)
Four analog sensor ports
Reset IP push-button: restores factory defaults
Standards: FCC Part 15, 802.3fc (PoE)
Warranty: 3 years
Power Supply
Product Number | Input Plug Type | Input Power | Output Power |
GBB100-POE | North America (NEMA 5-15) | 100-240V, 50-60Hz | 6VDC, 2A, 12W |
GBB100-UK POE | British Standard (BS1363) | ||
GBB100-UN POE |
North America (NEMA 5-15) British Standard (BS1363) Europlug (CEE7/16) |
||
GBB100-NPS POE | No Power Supply | No Power Supply | No Power Supply |
Software Features
HTTP/HTTPS: Web access
Alarms: high/low values, multiple thresholds per sensor
ESMTP: email alerts, ESMTP auth
SNMP (v1, v2c): gets, traps and clears alerts, MIB
Paging: email to pager proxy
XML: meta-tagged sensor values, alarms, config
Syslog: send debug messages to Syslog server
Access-control: three access levels (admin, control, view only)
Web cams (optional): Up to four can be displayed
GB100 POE Spec Sheet
Geist GBB100 POE Climate Monitor w Built in POE, temp and humidity Sensors
- Brand: Geist Manufacturing, Inc.
- Product Code: GBB100 POE
- Availability: In Stock
-
$363.00
- Ex Tax: $363.00